Hot Leathers
Hot Leathers Beer Cant Fix 3" X 4" Embroidered Patch PPW1157
Hot Leathers Beer Cant Fix 3" X 4" Embroidered Patch PPW1157
Regular price
$8.99 USD
Regular price
Sale price
$8.99 USD
Unit price
per
Shipping calculated at checkout.
Please click size to check availability:
Couldn't load pickup availability
All Hot Leathers patches feature a heat- sealed backing. This means that our patches may be ironed on or sewn on to most clothing easily
Patch Sewing Instructions:
Patch Sewing Instructions:
-
Note: Sewing by hand will give you greater control and is easier than trying to use a sewing machine when sewing into leather. Sewing on a patch will leave permanent holes on your jacket to please be careful about placement before you start.
- Identify where you want the patch and outline the area with tailor’s chalk
- Using a sewing pick, pick open the bottom seam of your garment lining just enough to allow your hand to fit inside the garment
- Position your inside hand so it is resting flat between the lining and outlines area
- Use your outside had to position the patch, you can lightly spray leather adhesive on the area to hold the patch, however this is not a permanent adhesive
- Begin threading your upholstery needle using a strong nylon thread that matches your patch, use your thimble to push the needle through the leather moving from inside the item to the outside
- This will allow the knot to be on the inside of the item, then pull the needle through and out with your outside hand and back down through the patch and leather
- Continue this pattern all around the patch, keeping stitches close together and to the end of the patch for the most secure attachment
- Once you have gotten back to where you started, send the needle through the first stitch, and loop it around a few times to make a finishing knot
- Finally restitch the garments lining and your all set
- Preheat your iron to 325-335 degrees. Do Not Use Steam.
- Press the area where you want your patch to be for 25 seconds
- Position the patch on the garment so that it is positioned where you would like it to be
- Place a lightweight cloth over the patch, using a back-and-forth motion with medium pressure on the area for 15 seconds
- The iron should never come into direct contact with the patch
- Carefully turn your garment inside out, using the same back and forth motion firmly iron the inside of the item where your patch is for about 1 minute
- Turn the garment right side in once more, use your clen lightweight cloth to cover the patch
- Iron the edges of the patch through the cloth to ensure they are thoroughly sealed
- Let the garment cool completely before wearing
- Ride Fast - Live Hard with Hot Leathers Apparel - Established 1983!
Sizing Tips
Sizing Tips
THANK YOU for shopping with Extreme Biker Leather.
PLEASE CLICK HERE TO VIEW OUR SIZING CHARTS
PLEASE NOTE: Important FYI facts to buying that right jacket, vest or chap
Leather traditionally runs a size small!
- Putting vest over jacket? – look at how much padding your jacket has - do not go by its size
- Ladies leather can run two sizes smaller – measure your chest size!
- Chaps fit by thigh size - Length can be cut as needed
Read below for further information that help explain best fit for different body types:
If you are unsure on right fit for you, please call the store for assistance!
As bikers, we will help fit you into the right Leather apparel because we know what questions to ask.
Some more facts about the actual fit or size that you may need ~
When deciding on the style you are interested in, consider your body type, weight and measurements.
Some very important tips!
Ask yourself these following questions :
- Are you going to put your vest over your jacket?
- Do you like to put patches on your vest or jacket?
- Do you like collars or leather to touch your neck?
- Do you ride long distance? or night ride?
- Do you want a clean look or are pockets, etc ok?
- Do you like to wear heavy tops when you ride?
- Do you like black or brown leather? Braid or fringe?
- How much do you want to spend?
- How much do you value your skin? (High quality protection and platinum leathers or gear can be costly, but always worth it!!!)
- Do you need tall sizes? (very hard to fit long arms - we have suggestions)
- Ladies, do you like your lower back exposed when you lean forward?
If you said no - than look for longer jackets. - Do you care for your leather at the end of seasons? (Find your local dry cleaner who specializes in leather conditioning)
-
When choosing a Helmet - we only suggest DOT helmets
(customers who choose non-DOT take responsibility for themselves)
review this helmet info page - remember to click back! http://obairlann.net/reaper/motorcycle/beginner/helmets.html
Full Face - never had one? Look at a modular first - less claustrophobic.
3/4 - a lighter style similar to Full Face without chin protection
Shorty's - the most popular (ps - if it says the thinnest DOT - steer away
**Measure your actual hat size this will help to find the correct fit.
All the above will help to steer you to the right fit and leather for you!
STILL NOT SURE? FEEL FREE TO CALL THE STORE -
585-482-7260 during business hours.
